|
| |
| GS-1015 SWISS TYPE
AUTOMATIC LATHE |
|
|
|
The GS-1015 Swiss Type Automatic Lathe designed and
manufactured by GE FONG delivers
superior speed and
accuracy for parts turning. Its 24 cam shaft speeds combined
with 16 spindle
speeds suit a wide range of
applications.
Concentricity accuracy of machining up to
0.003mm. The machine is quality constructed
throughout for
maximum dependability and minimum
trouble. |
|
|
 |
Features: |
|
|
| HEADSTOCK |
| The headstock is moved by two
plate cams and a lever mechanism. The main spindle is supported by roller
bearings at the front, and precision angular contact bearings at
the rear, and the headstock is guided by linear guide. This
allows for long-time and high-speed running, and assures smooth sliding of the headstock. The feed rate can be easily adjusted in
range from 1:1 to
3:1 |
|
|
| CAMSHAFT |
| The camshaft is driven by a precise worm
and worm wheel, reducing its rotation to 1/45. The
transmission equipment is designed so that, for each spindle
speed, the camshaft can be driven in 24 speed stages in order to
obtain optimum working conditions for all
jobs. |
|
 |
|
|
| TOOL
REST |
| Consists of five tools. The first two
tools are attached to a rocking arm. Horizontal movement is guided by
two cams. The other three tool holders are mounted on the three
vertical slides. Highly accurate micrometers, calibrated within
1/100mm, are used to make adjustments for these three
tools. |
|
|
| TRANSMISSION
MECHANISM |
| 16 different speeds of the main spindle
can be easily obtained just by changing the belt position on the
pulley. The cam shaft speed is reduced to 1/8 of main
spindle speed through the reducing
gear. |
|
 |
|
|
| NEWLY DESIGNED SINGLE
SPINDLE |
| The mechanism is convenient to
operate, adjust and maintain. Suitable for drilling, tapping,
threading, etc...A safety deviceautomatically stops the
machine is the event of threading or tapping failure. |
|
|
|
|
|
Specifications: |
| |
| Item |
GS-1015 |
UNIT |
| Spindle speed |
2395-8065
|
rpm |
| Cam
shaft speed |
1.5-20 |
rpm |
| OD tool rest
Nos. |
5 |
pcs |
| ID
tool rest Nos. |
1 |
pcs |
| Drill chuck |
ER11 |
pcs |
| Collet
chuck |
P10 |
pcs |
| Guide bush |
P10 |
pcs |
| Tool
blank Nos. |
5 |
pcs |
| Tool blank size |
8
* 8 |
mm |
| Max.
processing dia. |
Ø10 |
mm |
| Max. processing
length-Slide stravel |
50 |
mm |
| Max.
drilling dia. |
8 |
mm |
| Max. drilling
depth |
35 |
mm |
| Max. tapping
dia. |
M6
* P1.0mm |
Fe |
| Max. tapping
dia. |
M8
* P1.0mm |
Cu |
| Max. turned
taper-Slide taper |
Cam
Controlled |
mm |
| Spindle speed
steps |
16 |
steps |
| Cam shaft speed
steps |
stepsless |
steps |
| Spindle motor |
3
HP/2.2 KW |
HP |
| Cam shaft motor |
AC馬達 1/4HP |
HP |
| Coolant pump motor |
1
/ 8 |
HP |
| Coolant tank |
35-40 |
L |
| Spindle center height |
1105 |
mm |
| Weight |
700 |
KG |
| Lathe size |
1300*870*1050 |
mm |
|
|
|
Standard
Accessories: |
| |
| Item |
UNIT |
| Dies holder ∮20 |
SET |
| Cam blank |
SET |
| Tool box & Adjust tool |
SET |
| Lighting equipement |
SET |
| Oil splash-prevention cover |
SET |
| Coolant sys. |
SET |
| Bar end sensor |
SET |
| Manually loaded single bar feeder |
SET |
|
|
|
Optional Accessories: |
| |
| Item |
UNIT |
| Oil tank |
SET |
| Slotting attachment |
SET |
| Threading attachment |
SET |
| Automatic bar feeder |
SET |
| Sound-Proof feeding pipe-manually |
SET |
| Cams compeleted |
SET |
| ＊ All specification are subject to change without notice in advance ＊ |
|
|
